Racing Customers

Balanced injector flow rate and proper fuel atomization is key to obtaining peak HP. Effective injector testing will usually uncover a potential power loss. It is not unusual to compare same sets of injectors and find variations that affect power output. Verification through flow testing is the best way to guarantee you have a competitive edge. We can also help you determine the proper injector for a custom motor application.

Injector servicing consists of the following:

• Test and obtain a base line of each used injector including spray patterns, flow rate and pintle leakage to determine if cleaning is necessary
• Measure injector windings to determine correct internal resistance under load
• Disassemble injectors ( i.e. hoses, pintle caps, seals and screens)
• Ultra-sonic cleaning including pulsed injector operation during cleaning process
• Back flush procedure to remove internal contaminants
• Spray pattern and flow rate testing to obtain balanced results
• Leak down testing to ensure pintle sealing
• Final injector cleaning and refinishing with epoxy coating
• Final assembly (new hoses, caps, seals, and screens as needed)
• All information and data comparisons of each injector is downloaded and presented to you in a comparison report with graph

The price for most conventional (not side feed) injector servicing is $29.95 each plus parts (typically $4 to $5 per injector).
Removal of injectors from the car is additional labor.
Turn around time is usually 24 hours.